Select and configure your EZPLC below...
1: Select PLC Base |
2: Select AC or DC |
3: Select Connectivity |
4: Click on an empty module slot to select and add I/O |
||
 |
||
PLC Addons and Spares
EZPLC-EDIT-DN
DOWNLOADABLE EZPLC Programming Software
$137.00
EZPLC-M
Hardware User Manual For EZPLC
$56.00
EZ-MINIWIFI
Tiny EZ-miniWifi, less than 0.5" Deep, plugs into RS232 port, connects laptop to the EZTouch based HMI or EZTouchPLC from 50 ft away.
$79.00
EZPPS-30W
24VDC, 30W, 1.2A, 85-264 VAC Universal Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
$137.00
EZPPS-60W
24VDC, 60W, 2.5A, 85-264 VAC Universal Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
$148.00
EZPPS-90W
24VDC, 90W, 3.75A, 85-264 VAC Universal Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
$160.00
EZPPS-110-120W
24VDC, 120W, 5.0A, 85-150 VAC Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
$286.00
EZPPS-110-240W
24VDC, 240W, 10.0A, 85-150 VAC Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
$413.00
EZPPS-230-120W
24VDC, 120W, 5.0A, 180-260 VAC Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
$286.00
EZPPS-230-240W
24VDC, 240W, 10.0A, 180-260 VAC Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
$413.00
EZ-LED-SCREW
Multi Head, Multi Purpose Screwdriver kit with LED flash light
$39.00
EZPLC-PROFIBUS
Profibus DP slave communication interface card for EZPLC ONLY, pre-installed by the factory.
$240.00
EZPLC-DEVICENET
DeviceNet slave communication interface card for EZPLC ONLY, pre-installed by the factory.
$160.00
EZPLC-DNTERM5
DeviceNet 5-Pin Field Terminal Block for DeviceNet Interface Card
$17.00
EZIO-LINK-RLY
$137.00
EZIO-LINK-EXT
11-pin Extender Board for Bigger Terminals if needed. DIN Mount
$56.00
EZIO-LINK-CBL
$45.00
EZ-PGMCBL
Serial RS232 Programming Cable. You may need a serial to usb converter. Recommend Aten or StarTech.
$39.00
EZPLC-BAT
Coin cell replacement battery for PLC real time clock and back up for user's program in RAM.
$45.00
EZIO-TERM11CJC
11 Pin Removable 3.5mm Phoenix Terminal Block for Thermocouple Module with Built-in Cold Junction Compensator
$33.00
EZIO-TERM11
11 Pin Removable 3.5mm Phoenix Terminal Block for EZIO Modules
$16.00
EZPLC-TERM5
RS422/485 5-point Terminal Block
$17.00
MCO-EZPLC-4MOD
Spare cover mounts onto 4 module EZPLCs, EZTouch Remote I/O and EZTouchPLCs. Cover provides protection for base, modules, wiring, etc., while still allowing an operator to view status LEDs and access ports. Includes mounting instruction sheet.
$23.00
MCO-EZPLC-8MOD
Spare cover mounts onto 8 module EZPLCs, EZTouch Remote I/O and EZTouchPLCs. Cover provides protection for base, modules, wiring, etc., while still allowing an operator to view status LEDs and access ports. Includes mounting instruction sheet.
$29.00
EZIO-SCDRV
2.5mm blade screwdrivers
$14.00
EZIOP-DUMMY
Dummy Module-Screw Down
$14.00