PROGRAMMING SOFTWARE $171 One time buy FREE lifetime upgrades
Programming so EZ and Intuitive, that even your CEO can do it in minutes
Program this screen in less than 10 minutes. No training classes required.
EZTouch Introduced in 2001, constantly upgraded, has been used by more than 100,000 automation engineers. Here is what some of them have to say about EZTouch:
Plant Engineer of a Fortune 500 Plant manufacturing consumer products, IL
On-line edit feature of EZTouch HMIs has been a god-send as it allows us to change the screen design without shutting down the machine during initial set-up and trial of a new packaging line.
Chief Controls Engineer, Manufacturer of Environmental chambers, IL
We have used almost 200 EZ3 HMIs and EZPLCs from EZAutomation per year for the last 25 years, ever since EZAutomation came into existence. We have gone through some rough times but their technical support, application support and willingness to modify software quickly, is superb and the fact that they manufacture everything right in the US is great. We have had no issues of delivery during all this period.
Plant Manager of a Large Automotive plant in KY.
Ability to communicate via DH+ and also Ethernet IP at the same time allowed us to use AVG’s HMIs without having to spend millions of dollars to change from PLC 5 to ControlLogix all at once. We also appreciate the fact that AVG’s products are manufactured in US allowing for a quick response to changes.
Service Manager of one of the largest manufacturers of heavy duty winding machines in the Midwest.
Thank God for the EZ3 EZTouch to replace the EA9 obsoleted by Automation Direct. We have thousands of our machines in the field dating back to more than 10 years using 6” to 15” display sizes and CM5 with its limitations is questionable. So we opted for EZTouch and also appreciate the fact that it is made in America so that we can have peace of mind and not have to worry about Supply Chain and Tariff issues. Free program conversion was an added bonus.
EZTouch HMI, more rugged, twice as bright, higher resolution, high performance, NEMA 4x Class I DIV II, with detachable front option that cuts two thirds programming time and much more at half to one third the price.
No one has ever gotten fired for saving $3,000 on an HMI screen.
EZtouch brightness is already higher than PanelView Plus but it will soon to double.
2 FOR 1 AND SOON TO BE 3 FOR 1. PV+ HMIs are assembled in Mexico with components Made in China. Mexico has just announced 50% tarrif on all imports from January 2026. Mexico has a 30% tariff rate, soon to be 50% when shipping to USA. This will mean that a PV Plus Standard 10” is going to cost around $6,500.
PanelView will continue to have Long Lead Time Issues of over 3 months, Uncertain Delivery and Uncertain Prices particularly because of recent tariff developments.
Why EZ7 EZTouch with detachable and hot swappable display and touchscreen is truly the best replacement for PanelView's
Detachable Hot Swappable Metal Front NEMA 4x Class 1 Div 2 as a great replacement for PanelView's.
Front with display and touch screen can be hot swapped in less than 2 min and requires no change, no wiring or programming.
HMI communication end of EZ7 continues to communicate to the connected PLC even when the display/touch screen goes out which can be hot swapped in <2 mins.
EZ7 Detachable Metal Front (NEMA 4x Class 1 Div 2) not only reduces your down-time dramatically, it is a much more rugged construction for a stable touch screen and display as compared to plastic housing of PanelView.
EZ7 mounts in the same hole as PanelView Plus 7.
EZ7 is a drop-in replacement for Panelview, it can be mounted using the same cut-out as PanelView but with an addition of a mounting interface plate.
EZAutomation/AVG has been a licensed partner of Rockwell since middle 80's. Whereas Rockwell has discountinued it's support for DH+/RIO protocol since 2010, EZAutomation still supports DH+/RIO protocol in all it's products including EZTouch.
Uticor Drop In Replacements
Uticor's Drop-in Replacement HMI solutions provide seamless upgrades for outdated or discontinued operator interfaces without requiring rewiring or reprogramming. These HMIs are designed to match the form factor, communication protocols, and mounting configurations of legacy systems, ensuring a hassle-free transition. With enhanced displays, improved processing power, and modern connectivity options, they offer increased reliability and performance. Uticor’s replacement HMIs help industries extend the life of their automation systems while minimizing downtime and costs.
Plant Engineer of a Fortune 500 Plant manufacturing consumer products, IL
3. OEM Utility Allows Field Upgrade of User Program over Email or FTP Server without the need of Programming Software 
4. Superior Quality: Each Unit Goes Through a 24Hr Burn-in at an Elevated Temperature of 50°C as well as a HASS (Highly Accelerated Stress Screening).