Works with 95% of all PLCs including Ethernet/IP Saves more than 60% of panel space
EZRemote Cube IO is the most compact and flexible High Performance Remote IO (Comparable to Others). It has choice of 35 different plug-in most maintenance friendly IO modules. It's HC high current module capable of handling 4 Amp surge and still short circuit proof, saves at least $74 per output in external components. Up to 2048 IO's.
Best Remote I/O for Ethernet I/P, Modbus TCP/IP, Modbus RTU and Profibus, GE SRTP, Siemens ISO Ethernet, DeviceNet and other Serial protocols.
EZiest to configure, Automatic Address Assignment Remote IO Software
Choose the base, next the network, and drag-n-drop IO modules software assigns all the nodes. Add Ethernet node in you PLC tree diagram.
Best Remote I/O for Ethernet I/P, Modbus TCP/IP, Modbus RTU and Profibus, GE SRTP, Siemens ISO Ethernet, DeviceNet and other Serial protocols. 3-for-1 cost savings as compared to other Ethernet Remote IO's such as Phoenix, Turck, Omron, B&R, Opto22 etc.
FEATURES NOT AVAILABLE IN ANY OTHER REMOTE IO
1. Extremely compact world class Remote PLC IO with 32 plug-in IO in 5.75x4.8x3.1" package soon to become 64. Saves more than 60% of panel space. Most maintenance friendly with all plug-in connectors and LED indicators next to each IO.
2. Ultimate flexibility with 35 different 8 pt. modules, 16 to become soon.
3. Unique Patent Pending High Current (HC) DC Output modules for DC solenoids and Fans with Surge Current saving a lot of cost.
These High Current (HC) modules are specified to carry 1 Amp Steady State current to drive 24W solenoid and 4 Amp Surge current for 20 milliseconds. These DC inductive loads have 3-4 times in-rush current needing external solid-state relay, that costs $, Panel space and labor and yet no Short Circuit Protection. For short circuit protection, other suppliers recommend adding fast acting fuses for each output. No such need with HC Modules.
In-rush current in DC solenoids explained
DC solenoids are an inductive load that present a momentary short to it's driver circuit. For example even a small 6W 24V DC that has a steady state current of 250 mA will have an in-rush current of 750mA to 1A. This in-rush current could last only a few µs but the output transistor or Mosfet driving it needs to have a capability of handling 1A. Therefore a prudent automation engineer will put in an external solid state relay to drive this DC solenoid. A typical solid state relay (such as Crydom) will cost $57 for each SSR and there would be at least a lobor cost of $5 to mount and connect each solid state relay.
Now solid state relays are not short circuit proof leaving the Automation engineer no choice but to put a fast acting fuse in series with the coil of the DC solenoid costing additional material and labor.
Each DC output driving a DC solenoid will cost at least additional $75 per output.
On first glance it would appear that the problem is solved even though it costs substantial additional money, but these fuses present a maintenance problem in that the engineer/technician troubleshooting it has to find this fuse and replace it in case the solenoid shorted.
HERE’S WHAT YOU GET WITH EZREMOTE CUBE I/O:
EZRIO leaves your PLC intact but reduces your IO cost to 1/3rd.
EZ connectivity and configuration with EtherNet/IP, Modbus TCP/IP, Modbus RTU, DeviceNet, Profibus & EZ Serial and Ethernet protocols
Highest Processing power per cubic inch.
Highest Reliability and Noise Immunity in industry.
3 EZRemote Cube IO for the cost of 1 equivalent Remote IO.
Incredibly condensed, 35 different combo plug-in I/O modules.
Communications galore, DeviceNet, Profibus, all Industrial Ethernet protocols, Ethernet/IP, Modbus TCP/IP, Siemens ISO, GE SRTP.
Modular Expandable to 2048 I/O.
Status LED for each I/O in every model and Plug-in Terminal Blocks.
