All plant/maintenace/control engineers know that the weakest component in any HMI is touchscreen and display. As these are subject to a lot more wear and tear as compared to the rest of logic and communication electronics. That is the intention behind breaking the two into two parts. The touchscreen and display and the back panel with logic and communication. If the touch screen and/or display needs to be replaced, all it takes is two minutes to unscrew the damaged front panel and replace it with a new one. No re-wiring, no loading a new program, no IP setup.

MINIMUM DOWN TIME!

In addition, door of the control cabinet does not need a large rectangular cutout. Instead, only a 3/4“ hole is needed for the the HDMI cable connecting the front panel to the back panel. Also, the back panel could be mounted 3’ away to give the control engineer flexibility in HMI mounting. Many EZ7 customers find it convenient to mount the back panel on a different side of EZ7 enclosure or control cabinet. This special EZ7 HDMI 3 foot cable (EZ7-CBL-HDMI3) needs to be ordered separately.

PROGRAMMING SOFTWARE $171 One time buy FREE lifetime upgrades

Programming so EZ and Intuitive, that even your CEO can do it in minutes

Program this screen in less than 10 minutes.
No training classes required.

Troubleshooting a PLC system, it is going to be difficult trying to remember the correct syntax of a particular PLC. It is in this context the EZPLC Drag-n-Drop software was developed. It is essentially a graphical language. You draw the ladder intuitively.

No complicated syntax and rules. It can be learned in a few minutes. Tens of thousands of users learned this software without having to ever attend a class.

 Plant Engineer of a Fortune 500 Plant manufacturing consumer products, IL

On-line edit feature of EZTouch HMIs has been a god-send as it allows us to change the screen design without shutting down the machine during initial set-up and trial of a new packaging line.

 Chief Controls Engineer, Manufacturer of Environmental chambers, IL

We have used almost 200 EZ3 HMIs and EZPLCs from EZAutomation per year for the last 25 years, ever since EZAutomation came into existence. We have gone through some rough times but their technical support, application support and willingness to modify software quickly, is superb and the fact that they manufacture everything right in the US is great. We have had no issues of delivery during all this period.

 Plant Manager of a Large Automotive plant in KY.

Ability to communicate via DH+ and also Ethernet IP at the same time allowed us to use AVG’s HMIs without having to spend millions of dollars to change from PLC 5 to ControlLogix all at once. We also appreciate the fact that AVG’s products are manufactured in US allowing for a quick response to changes.

 Service Manager of one of the largest manufacturers of heavy duty winding machines in the Midwest.

Thank God for the EZ3 EZTouch to replace the EA9 obsoleted by Automation Direct. We have thousands of our machines in the field dating back to more than 10 years using 6” to 15” display sizes and CM5 with its limitations is questionable. So we opted for EZTouch and also appreciate the fact that it is made in America so that we can have peace of mind and not have to worry about Supply Chain and Tariff issues. Free program conversion was an added bonus.

 Chief Engineer, Manufacturer of Semiconductor manufacturing equipment in CA.

EZPLC is a unique PLC that is extraordinarily maintenance friendly. EZAutomation developed a High Current (HC) module in record three months that allowed us to control two 24 VDC fans with an inrush current exceeding three times the steady state current, and still be short circuit proof eliminating the need for external solid state relays and fast acting fuses to protect the PLC outputs. We have bought more than 300 EZPLCs annually for the last four years. We also like the fact that EZAutomation products are designed and manufactured in US as a result of which, we did not suffer any delivery issues during COVID.

 Director of Technologies, Manufacturer of Motor control systems, PA

We had a need for a cost effective small PLC, 200 per month, for our motor control centers and came across EZPLC. I fell in love with it, the moment I got my hands on one. It's world class IO modules that have removable terminal blocks, short circuit proof outputs in a tiny package, yet extremely maintenance friendly was impressive. Software was intutive. Now I hear they are going to have 16 IOs in the same size, I don't know how they do it but it's wonderful. EZAutomation is the epitome of American Innovation and Manufacturing.

EZRackPLC with Ethernet/IP scanner

EZRackPLCs have a unique feature in that it allows it to be the EtherNet Scanner/Master. That means it can be used as a Master controller for initiating communication with any EtherNet/IP compatible devices such as EtherNet/IP Encoders from Autotech Controls or EtherNet compatible powerflex AC drives or EtherNet temperature controller etc.

1. Detachable and Hot-Swappable Touchscreen/Display

9. High performance PLC at a higher level than the CompactLogix PLC, and with most Most maintenance friendly IO with all plug-in connectors and LED indicators next to each IO.

14. 2.4 ms scan time for 1000 instructions including all overhead.

15. 3 Amp short circuit proof DC outputs capable of handling 4 Amp Surge that help eliminate the need of external solid state relays and fuses.