EZ3 Series Starter Kit

EZ3 Workhorse:
21 Exceptionally
Innovative Features
Full Feature 7”, No Reduced model like ADC

We load up every HMI to its full capability. No Reduced Feature “R” models like ADC, No basic, Advanced or Smart Series like Maple, Ethernet, 2 Serial, 2 USB, 1 Micro SD, all built-in.
7” EZ3 EZTouch, Made in America, Direct from Manufacturer

Patented HMI on-line edit,
No Machine Shutdown
No downtime!

Today you don’t accept a PLC that does not have “On-Line” Edit. Why compromise on HMI? Why allow productivity loss because you want to make a small change on your screen?

Only EZTouch has Patented On-Line Edit, No down-time!

Every model allows wi-fi
connection to laptop
without any wire

Trying to find the right programming cable, opening up the control panel to plug-into the right connector on your HMI many times located at hard to reach places, is a hassel. EZ wifi at a very nominal cost avoids all that. Just bring your laptop to within 50 ft. of the HMI and you can program it over EZ wifi.

Only HMI that can still talk
to AB’s DH+
1 million nodes still in Operation

American control systems for over 3 decades used the DH+ for communication between different control devices. Most Automation engineers refer this connection as Blue Hose. There are still over 1 million such connections in the world, 80% in NA. EZAutomation is the only company manufacturing and supporting DH+ since 1980’s.

Upload HMI Program from
USB without Software & Cable

A new HMI program can be uploaded to EZTouch models with USB host. This can be done on factory floor at an OEM, System Integrator or an End-user. No laptop computer, programming software or cable is required. A standard USB will have the latest HMI program and EZTouch will upload the program on command.

EZ Soft Remote Software
on a PC on your desk.

Monitor & Control your EZTouch
based HMI over Internet, Intranet
or Modem from any where in
the world

Remote Monitoring and Control,
Smart phones & Ethernet

Enjoy direct access from anywhere.