Beyond Exceptional Features, Top Quality, Made in America, sold Factory Direct, these starter kits offer an additional discount of 30+%.
We assume that you have browsed through all the features and benefits, comparisons and tech documents. If not, please take a couple of minutes to go through at least the product comparisons, you'll learn a lot!
Besides you have a 30 day money back guarantee. So what have you got to lose? We are sure you will be pleased! 99.99% are!!
Selection Guide & Detailed Technical Information Online 1-877-774-3279
Innovative Features Full Feature 7”, No Reduced model like ADC
We load up every HMI to its full capability. No Reduced Feature “R” models like ADC, No basic, Advanced or Smart Series like Maple, Ethernet, 2 Serial, 2 USB, 1 Micro SD, all built-in.
7” EZ3 EZTouch, Made in America, Direct from Manufacturer
Every model allows wi-fi connection to laptop without any wire
Trying to find the right programming cable, opening up the control panel to plug-into the right connector on your HMI many times located at hard to reach places, is a hassel. EZ wifi at a very nominal cost avoids all that. Just bring your laptop to within 50 ft. of the HMI and you can program it over EZ wifi.
Only HMI that can still talk to AB’s DH+ 1 million nodes still in Operation
American control systems for over 3 decades used the DH+ for communication between different control devices. Most Automation engineers refer this connection as Blue Hose. There are still over 1 million such connections in the world, 80% in NA. EZAutomation is the only company manufacturing and supporting DH+ since 1980’s.
Upload HMI Program from USB without Software & Cable
A new HMI program can be uploaded to EZTouch models with USB host. This can be done on factory floor at an OEM, System Integrator or an End-user. No laptop computer, programming software or cable is required. A standard USB will have the latest HMI program and EZTouch will upload the program on command.