Beyond Exceptional Features, Top Quality, Made in America, sold Factory Direct, these starter kits offer an additional discount of 30+%.
We assume that you have browsed through all the features and benefits, comparisons and tech documents. If not, please take a couple of minutes to go through at least the product comparisons, you'll learn a lot!
Every model allows wi-fi connection to laptop without any wire
Trying to find the right programming cable, opening up the control panel to plug-into the right connector on your HMI many times located at hard to reach places, is a hassel. EZ wifi at a very nominal cost of $49 avoids all that. Just bring your laptop to within 50 ft. of the HMI and you can program it over EZ wifi.
Only HMI that can still talk to AB’s DH+ 1 million nodes still in Operation
American control systems for over 3 decades used the DH+ for communication between different control devices. Most Automation engineers refer to this connection as Blue Hose. There are still over 1 million such connections in the world, 80% in NA. EZAutomation is the only company manufacturing and supporting DH+ since 1980’s.
Upload HMI Program from USB without Software & Cable
A new HMI program can be uploaded to EZTouch models with USB host. This can be done on factory floor at an OEM, System Integrator or an End-user. No laptop computer, programming software or cable is required. A standard USB will have the latest HMI program and EZTouch will upload the program on command.