EZPanel PC HMI
EZPanel PC SCADA
All built-in Software saves hours
and hours of O.S. and program loads

• NEMA 4/4X, Windows 10, Intel Celeron J1900/quad core/2.0 GHz processor,
• 4GB RAM, 2 USB ports(1 USB 2.0, 1 USB 3.0), 2 Ethernet ports
• 2 RS232 port, 1 RS485 port, 1 VGA port
• 1 HDMI port, 1 Audio In, 1 Audio Out

Patented HMI on-line edit,
No Machine Shutdown
No downtime!

Today you don’t accept a PLC that does not have “On-Line” Edit. Why compromise on HMI? Why allow productivity loss because you want to make a small change on your screen?

Only EZTouch has Patented On-Line Edit, No down-time!

Every model allows wi-fi
connection to laptop
without any wire

Trying to find the right programming cable, opening up the control panel to plug-into the right connector on your HMI many times located at hard to reach places, is a hassel. EZ wifi at a very nominal cost avoids all that. Just bring your laptop to within 50 ft. of the HMI and you can program it over EZ wifi.

EZ Soft Remote Software
on a PC on your desk.

Monitor & Control your EZTouch
based HMI over Internet, Intranet
or Modem from any where in
the world

Remote Monitoring and Control,
Smart phones & Ethernet

Enjoy direct access from anywhere.