Innovative Unique Features
-
Made in America
- Smallest Wonder <1" deep
- 10lb axial and radialshaft load
- 1/4" stainless steel shaft
- Single bearing with a seal
- 250, 500 & 720 counts/PPR
- NEMA 12 in ABS, NEMA 4 in Metal Can
- 10 - 30 Volt power, wide range
- ET7272 short circuit proof line driver outputs
- Just $89
- Servo or Face mount in the same ABS model
- Cable output with ABS and MS connector with Metal Can housing.
|
|
Size 15 EZEncoder Features
1/4" Stainess Steel Shaft
Size 15 EZ Encoders sport an industry standard 1/4" shaft, but our shaft is Made of corrosion resistant stainless steel.
Bearing with Shaft Seal
Size 15 EZ Encoders have a double bearing with a seal built-in allowing it to get tested and UL approved for NEMA 4 rating.
10 lb Shaft Load
The Size 15 EZEncoder has an incredible 10 lb shaft load rating as comapred to 3 lb for a less than equivalent Dynapar and 5 lb for a less than equivalent BEI. It is medium duty Size 15 as compared to light duty from others.
ET7272 Line Drive Outputs
EZEncoder can be connected 100 ft away from the controller due to the superb line drive capability of ET7272 drive clips. ET7272 also rovides short-circuit proof and thermally protected outputs.
4 for 1 Pricing
Size 15 medium duty EZEncoder with a 10 lb shaft load specifications, NEMA 12 UL rating, is a n exceptionally Innovative concept, Made in AMerica and sold Factory Direct at just $89 i an unbelivable price break through. Its nearest competition from Dynapar, Model E14 sells for $349. |
|
Encoder Size 15
Size 15 EZ Encoder |
 |
- Size 15
- 250 PPR, 500 PPR, 720 PPR option
- Universal 5V Output (Sinking and Sourcing Capable) and Universal 30V Output (Sinking and Sourcing Capable) option
- 2 ft, 5 ft and 6.5 ft cable option
|
| Starting from: $89 |
Specification sheet  |
| Manual |
 |
|
|
|
|
