| Feature |
EZ Timer AC Models |
| Part Number |
EZ-CKK-461 (Cycle, 8-pin, DPDT)
EZ-T1K-461 (Time on Delay, 8-pin, DPDT)
EZ-T2K-441 (Single Shot, 8-pin, SPDT)
EZ-T2K-461 (Single Shot, 11-pin, DPDT)
EZ-T3K-441 (Time off Delay, 8-pin, SPDT)
EZ-T3K-461 (Time off Delay, 11-pin, DPDT)
EZ-TM4-461 (Programmble, 11-pin, DPDT) |
EZ-CKK-465 (Cycle, 8-pin, DPDT)
EZ-T1K-465 (Time on Delay, 8-pin, DPDT)
EZ-T2K-465 (Single Shot, 11-pin, DPDT)
EZ-T3K-465 (Time off Delay, 11-pin, DPDT)
EZ-TM4-465 (Programmble, 11-pin, DPDT) |
| Source Voltage |
120 VAC, 50/60Hz |
240 VAC, 50Hz |
| Permitted Power Fluctuation |
85 - 135 VAC, 50/60Hz |
185 - 260 VAC, 50Hz |
| Power Consumption |
3 VA Max. |
| Memory Backup upon Power Failure |
EEPROM writing up to 100,000 times; Memory duration: 10years |
| Ambient Temperature |
-20-60°C (-4 to 140°F) |
| Storage Temperature |
-50-150°C (-58 to 302°F) |
| Ambient Humidity |
35-85% RH non-condensing |
| Withstand Voltage |
2KVAC for 1 min |
| Vibration Resistance |
Displacement amplitude of 1mm at 10-60 Hz along 3 axes |
| Impact Resistance |
Durability: 500 m/s2 along three axes; Operating impact: 100 m/s2 along three axes |
| Noise Resistance |
AC power between terminals ±1.5kV (pulse width 1μs and rise time 1ns) |
| Protective Structure |
IP65 (front panel only) when mounted in appropirate enclosure |
| Socket (8-pin/11-pin) |
Conforming Wiring |
12 to 22 AWG |
| Permitted torque |
0.5Nm (0.369 ft/lbs) |
| Performance Specification |
| Operational Format |
On-delay, off-delay, single-shot, cycle and programmable (all 4 modes in one) |
| Number of Digits |
3 digits |
| Display |
Large bright red LED with 12mm character height |
| Time Range |
0.01s-999 hrs |
| Display Read-out |
Remaining/Elapsed time, Setpoint, Type (T1, T2, T3, CYC), Password Protection |
| Timer Precision |
0.1% or ±20 ms (whichever is greater) |
| Start Input Response |
Less than 15 ms/5 ms/1 ms |
| External Reset |
Min. signal amplitude 2 ms (typical) |
| Output |
Relay output: SPDT(Single Pole Double Throw) 250 VAC 7A (resistive load) and
DPDT(Double Pole Double Throw) 250 VAC 7A (resistive load) |
| Output Duration (flicker) |
10ms/1sec/1min/1Hr variable every 3ms |
| Installation |
8-pin or 11-pin relay socket mounting |
| Agency Approval |
UL, cUL, CE (File No. E486073) |
