Outdoor Sunlight Readable
HMI

• 6" 800 nits, 10" 1000 nits
• Ideal in direct sunlight in an
outdoor evironment such as
Beach, dry kiln or the deck of
an oil rig or battle ship

Patented HMI on-line edit,
No Machine Shutdown
No downtime!

Today you don’t accept a PLC that does not have “On-Line” Edit. Why compromise on HMI? Why allow productivity loss because you want to make a small change on your screen?

Only EZTouch has Patented On-Line Edit, No down-time!

Every model allows wi-fi
connection to laptop
without any wire

Trying to find the right programming cable, opening up the control panel to plug-into the right connector on your HMI many times located at hard to reach places, is a hassel. EZ wifi at a very nominal cost of $49 avoids all that. Just bring your laptop to within 50 ft. of the HMI and you can program it over EZ wifi.

Upload HMI Program from
USB without Software & Cable

A new HMI program can be uploaded to EZTouch models with USB host. This can be done on factory floor at an OEM, System Integrator or an End-user. No laptop computer, programming software or cable is required. A standard USB will have the latest HMI program and EZTouch will upload the program on command.

EZ Soft Remote Software
on a PC on your desk.

Monitor & Control your EZTouch
based HMI over Internet, Intranet
or Modem from any where in
the world

Remote Monitoring and Control,
Smart phones & Ethernet

Enjoy direct access from anywhere.