3: Click on an empty module slot to select and add I/O
Additional Components for System
EZ-PGMCBL - $29.00 Serial RS232 Programming Cable. You may need a serial to usb converter. Recommend Aten or StarTech.
EZ-MINIWIFI - $59.00 Tiny EZ-miniWifi, less than 0.5" Deep, plugs into RS232 port, connects laptop to the EZTouch based HMI or EZTouchPLC from 50 ft away.
EZPPS-30W - $99.00 24VDC, 30W, 1.2A, 85-264 VAC Universal Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
EZPPS-90W - $119.00 24VDC, 90W, 3.75A, 85-264 VAC Universal Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
EZTouch-Editor-DN - $129.00 Programming Software (Downloadable version 2.3.21) for all EZTouch, EZTouchPLC, and EZSoftHMI products. Development of HMI Screens for EZTouch and EZSoftHMI and Development of HMI screens and PLC Ladder logic for EZTouch I/O. To purchase a CD, click here.
EZPPS-110-120W - $229.00 24VDC, 120W, 5.0A, 85-150 VAC Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
EZPPS-230-120W - $229.00 24VDC, 120W, 5.0A, 180-260 VAC Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
EZPPS-110-240W - $329.00 24VDC, 240W, 10.0A, 85-150 VAC Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
EZPPS-230-240W - $329.00 24VDC, 240W, 10.0A, 180-260 VAC Input, 3-digit LED for Voltage or Maintenance Timer display, 2-digit LED for Current display, Programmable Current Limit, Adjustable Voltage, Din Mount, NEC Class 2 Industrial Power Supply
PLC Accessories
EZPLC-PROFIBUS - $189.00 Profibus DP slave communication interface card for EZPLC ONLY, pre-installed by the factory.
EZPLC-DEVICENET - $119.00 DeviceNet slave communication interface card for EZPLC ONLY, pre-installed by the factory.
EZIO-LINK-EXT - $45.00 11-pin Extender Board for Bigger Terminals if needed. DIN Mount
EZPLC-M - $42.00 Hardware User Manual For EZPLC
EZPLC-BAT - $35.00 Coin cell replacement battery for PLC real time clock and back up for user's program in RAM.
EZ-BAT - $29.00 Replacement 1/2 AA, 3.6 volt lithium battery for RAM backup
EZ-PGMCBL - $29.00 Serial RS232 Programming Cable. You may need a serial to usb converter. Recommend Aten or StarTech.
EZ-LED-SCREW - $29.00 Multi Head, Multi Purpose Screwdriver kit with LED flash light
EZIO-TERM11CJC - $22.00 11 Pin Removable 3.5mm Phoenix Terminal Block for Thermocouple Module with Built-in Cold Junction Compensator
MCO-EZPLC-8MOD - $19.00 Spare cover mounts onto 8 module EZPLCs, EZTouch Remote I/O and EZTouchPLCs. Cover provides protection for base, modules, wiring, etc., while still allowing an operator to view status LEDs and access ports. Includes mounting instruction sheet.
MCO-EZPLC-4MOD - $14.00 Spare cover mounts onto 4 module EZPLCs, EZTouch Remote I/O and EZTouchPLCs. Cover provides protection for base, modules, wiring, etc., while still allowing an operator to view status LEDs and access ports. Includes mounting instruction sheet.
