EZ12 Sleek and Slim: Just 1.82" deep as compared to 2.38" for EZ3 series.
Innovative Features Full Feature 7” for $529, No Reduced model like ADC
We load up every HMI to its full capability. No Reduced Feature “R” models like ADC, No basic, Advanced or Smart Series like Maple, Ethernet, 2 Serial, 2 USB, 1 Micro SD, all built-in.
7” EZ12 EZTouch, Made in America, Direct from Manufacturer, for just $529 Vs. ADC’s 7” full featured model at $548 and Maple’s 7” $460, $590, $650 models.
EZ Mounting System No DIN clips!! No Studs!! patent pending
EZAutomation has invented a new panel mounting mechanism for its EZ12 series of EZTouch panels this negates the need for DIN clips or use of studs and nuts. Mounting screw simply swings from rest position to mount position to screw-on to the mounting surface of the enclosure. EZ12 mounting system is UL certified for NEMA 4X.
Every model allows wi-fi connection to laptop without any wire
Trying to find the right programming cable, opening up the control panel to plug-into the right connector on your HMI many times located at hard to reach places, is a hassel. EZ wifi at a very nominal cost of $49 avoids all that. Just bring your laptop to within 50 ft. of the HMI and you can program it over EZ wifi.
Upload HMI Program from USB without Software & Cable
A new HMI program can be uploaded to EZTouch models with USB host. This can be done on factory floor at an OEM, System Integrator or an End-user. No laptop computer, programming software or cable is required. A standard USB will have the latest HMI program and EZTouch will upload the program on command.